Mandatory Disclosure 2025-26 NIRF-2025 Data for Innovation NIRF-2025 Data for Engineering Colleges NIRF-2025 Data for Overall Mandatory Disclosure 2024-25

PLACEMENTS - Amazon - 5 , Accenture - 70 , TCS - 100 , Infosys - 48 , Bosch - 4 , Hexaware - 84 , Tech Mahindra - 8 , Capgemini - 40 , Cisco - 2 , Cognizant - 43 , IBM - 6 , Wipro - 90 , Virtusa - 80 , Mindtree , NTT Data , Inveniolsi , Hyundai - 6 , Deloitte , PWC , Tvarana , HCL , Techigai , Apps Associates , Aptroid , Pennant , Veda , ZenQ , Infolabs , KPIT Many More.....

Dr Ravikanth Yajjala

Dr Ravikanth Yajjala

Assistant Professor, MECH
ravikanth.y@lendi.edu.in
Profile

06 years

Male

Industrial Metallurgy

M.Tech, Ph.D
Seminars & Workshops

S. No

Name of the Course

Duration

Place

1.

AICTE Training and Learning (ATAL) Academy Blended/Hybrid 2-week FDP on "Nano Structured Materials- Synthesis, Characterization, and Applications"

10th October – 15th October 2022 &  17th October – 21st October 2022

JNTUK University College Of Engineering,Vizianagaram

2.

One Week International Online Faculty Development Program on "Trends & Challenges In The Development of Electric Vehicles & Hybrid Electric Vehicles (SERIES-I)"

26th May - 30th september 2022

Lendi Institute of Engineering and Technology, Vizianagaram, A.p

3.

Faculty Development Programme (FDP) on “Advances in Mechanical Engineering Research”

24th May - 28th May 2022

Centurion University of Technology and Management, Odisha

4.

AICTE JNTUK 2-week FDP on Recent Advances in Materials & Challenges in Manufacturing Techniques

22nd March- 3rd April 2021

Jawaharlal Nehru Technological University, Kakinada.

5.

International Pre-conference Workshop on Tribology in India Trib

1st December

2019

Indian Institute of Science, Bangalore.

6.

National Workshop on “Mechanical and Tribology Behavior of Advanced Composites”

21st – 25th January 2019

National Institute of Technology, Warangal.

7.

Faculty Development Programme (FDP) on “Advanced in Materials and Manufacturing Processes”

29th October - 03rd November 2018

Jawaharlal Nehru Technological University, Kakinada.

8.

Workshop on “Engineering Failures – Prediction, Prevention and Post Analysis”

13th February 2015

Andhra University, Visakhapatnam
Journals
  1. Yajjala Ravikanth, Inampudi Narasimha Murthy, Jinugu Babu Rao, “Correlation between SDAS and mechanical properties of Al–Si alloy made in Sand and Slag moulds”. J Mater Res Technol. Vol.9. Issue 3 2020, Pages 6257-6267, ISSN 2238-7854, (Elsevier publication) (Impact factor: 5.289)  https://doi.org/10.1016/j.jmrt.2020.02.066
  2. Y. Ravi Kanth, I. Narasimha Murthy, S. Nagappa, J. Babu Rao, “Influence of mould materials on wear behavior of A356 alloy” Materials Today: Proceedings,2021. Vol. 45, Part 6, 2021, Pages 5177-5182, ISSN 2214-7853. (Elsevier publication) (Impact factor: 1.24)  https://doi.org/10.1016/j.matpr.2021.01.696
  3. I. Gopi Lakshmi, Y. Ravi Kanth, M. Kumar Raja, NBR Mohan Rao, J. BabuRao, “Dry sliding wear behaviour of micro and nano High Entropy Fe-Cr slag particulates reinforced AA 7075 composites” Materials today proceedings, Vol. 42, Part 2, 2021, Pages 590-599, ISSN 2214-7853. (Elsevier publication) (Impact factor: 1.24) https://doi.org/10.1016/j.matpr.2020.10.674
  4. Ch. Bharat Kumar, Y. Ravi Kanth, A. Likhita, I. Narasimha Murthy and J. Babu Rao, “Microstructure and Mechanical Properties of Oxide Particulates Reinforced PMCs” Materials today proceedings, Vol. 42, Part 2, 2021, Pages 1230-1238, ISSN 2214-7853. (Elsevier publication) (Impact factor: 1.24  https://doi.org/10.1016/j.matpr.2020.12.873
  5. G.Vara prasad, S. Nagappa, Y. Ravi Kanth, I. Gopi Lakshmi, J. Babu Rao, “Effect of Brachyura Shell Particles on Glass Fibre Reinforced Epoxy Polymer Composite” Materials today proceedings, Vol. 42, Part 2, 2021, Pages 555-562, ISSN 2214-7853.(Elsevier publication) (Impact factor: 1.24  https://doi.org/10.1016/j.matpr.2020.10.521
  6. B. Srinivas, Y. Ravi Kanth, J. Babu Rao, “A study on non destructive evaluation of AA2024 by using different moulding sands by CO2 casting process” Materials Today: Proceedings,2021. Vol. 45, Part 6, 2021, Pages 5237-5242, ISSN 2214-7853. (Elsevier publication) (Impact factor: 1.24 https://doi.org/10.1016/j.matpr.2021.01.825
  7. I. Gopi Lakshmi, Y. Ravi Kanth, J. BabuRao, “Influence of micro and nano particles on mechanical behaviour of slag reinforced AA7075 composites” Materials Science Forum (ISSN: 1662-9752), vol. 1048, Trans Tech Publications, Ltd., 4 Jan. 2022, pp. 33–42. (Impact factor: 0.55)  https://doi.org/10.4028/www.scientific.net/msf.1048.33
  8. I. Gopi Lakshmi, Y. Ravi Kanth, I. Narasimha Murthy J. BabuRao, “Microstructure evaluation on micro and nano slag particles reinforced AA7075 composites” Materials Science Forum (ISSN: 1662-9752), vol. 1048, Trans Tech Publications, Ltd., 4 Jan. 2022, pp. 43–53. (Impact factor: 0.55) https://doi.org/10.4028/www.scientific.net/msf.1048.43
  9. B. Srinivas, Y. Ravikanth, J Babu Rao. (2022). Effect of Heat Transfer Rate on Different Shapes using Different Moulding Sands on Microstructural and Mechanical Properties of AA2024 by CO2 Process. Design Engineering, (1), 665-680. http://thedesignengineering.com/index.php/DE/article/view/8845
  10. Y. Ravi Kanth, I. Narasimha Murthy, J. Babu Rao,“Mechanical behaviour of E-glass fibre , fly ash , bottom ash and pond ash reinforced epoxy composites,” vol. 12, no. 9, pp. 184–195, 2022. doi: 10.9790/9622-1209184195.
  11. Surakasi, Raviteja, Manyala Gangadhar Rao, Haribabu Yegireddy, Ravi Ganivada, and Ravikanth Yajjala. "Examining the Effects of Load Variation on the Tribological Behavior of a Blended Lubricant Made from Corn Oil Biodiesel." International Journal of Vehicle Structures & Systems (IJVSS) 15, no. 5 (2023).
  12. Lakshmi, B., Y. Ravi Kanth, and J. Babu Rao. "Copper Slag-Sustainable Mold Material for Non-ferrous Foundries." International Journal of Metalcasting (2023): 1-15. (Impact factor: 2.6) https://doi.org/10.1007/s40962-023-01166-8
  13. Surakasi, Raviteja, Raja, Subramani, Praveenkumar, Vijayakumar, Ravikanth, Yajjala, Etc.,. "Enhanced tribological performance of transesterified corn oil biodiesel blends with CuO and TiO2 nanoparticles: experimental analysis on wear and friction reduction using environment friendly lubricants" International Journal of Chemical Reactor Engineering, vol. 22, no. 10, 2024, pp. 1209-1222. https://doi.org/10.1515/ijcre-2024-0156
Conferences
  1. Y. Ravikanth, I. Narasimha Murthy, J. Babu Rao, “Dry sliding wear behavior of al-si alloy castings made in silica sand, iron and ferro alloys slag moulds” 10th International Conference on Industrial Tribology (India Trib - 2019), 1-4 December 2019, IIsc, Bangalore.
  2. Y. Ravikanth, I. Narasimha Murthy, J. Babu Rao, “Iron and Ferro Alloys Slags: Alternative mould materials for Foundry Industry” International Conference on Advances in Process Metallurgy (APM 2019), 4-5July 2019, IIsc, Bangalore, pp. 59.
  3. Y. Ravikanth, G. Siva Kumar, I.N. Murthy and J Babu Rao, “Effect of Heat treatment on Cold Workability Limits of Fly Ash Particulate Reinforced AA 2024 Composites” National Conference on Emerging Trends in Mechanical Engineering (ETME - 2019), 9th-10th January,2019, NIT, Warangal, pp.251-256.
  4. Ch. Bharat Kumar, Y. Ravi Kanth, A. Likhita, I. Narasimha Murthy and J. Babu Rao, “Microstructure and Mechanical Properties of Oxide Particulates Reinforced PMCs” 2nd international conference on Recent advances in materials and manufacturing (ICRAMM – 2020), 20-21 November 2020, velalar college of Engineering & Technology, Erode, Tamil Nadu, Volume-2, pp. 654-663.
  5. I. Gopi Lakshmi, Y. Ravi Kanth, M. Kumar Raja, NBR Mohan Rao, J. BabuRao, “Dry sliding wear behaviour of micro and nano High Entropy Fe-Cr slag particulates reinforced AA 7075 composites” 2nd international conference on Recent advances in materials and manufacturing (ICRAMM – 2020), 20-21 November 2020, velalar college of Engineering & Technology, Erode, Tamil Nadu, Volume-3, pp. 1193-1204.
  6. G.Vara prasad, S. Nagappa, Y. Ravi Kanth, I. Gopi Lakshmi, J. Babu Rao, “Effect of Brachyura Shell Particles on Glass Fibre Reinforced Epoxy Polymer Composite” 2nd international conference on Recent advances in materials and manufacturing (ICRAMM – 2020), 20-21 November 2020, velalar college of Engineering & Technology, Erode, Tamil Nadu, Volume-3, pp. 1227-1237.
  7. Y. Ravi Kanth, I. Narasimha Murthy, S. Nagappa, J. Babu Rao, “Influence of mould materials on wear behavior of A356 alloy” 2nd International Conference on Aspects of Materials Science and Engineering (ICAMSE2021), 5th -6th March 2021, Panjab University, Chandigarh, Punjab.
  8. B. Srinivas, Y.Ravi Kanth, J. Babu Rao, “A study on non destructive evaluation of AA2024 by using different moulding sands by CO2 casting process” 2nd International Conference on Aspects of Materials Science and Engineering (ICAMSE2021), 5th -6th March 2021, Panjab University, Chandigarh, Punjab.
  9. I. Gopi Lakshmi, Y. Ravi Kanth, J. BabuRao, “Influence of micro and nano particles on mechanical behaviour of slag reinforced AA7075 composites”  3rd international conference on Materials science and manufacturing Technology (ICMSMT – 2021), 23-24 April 2021, Coimbatore, Tamil Nadu.
  10. I. Gopi Lakshmi, Y. Ravi Kanth, I. Narasimha Murthy J. BabuRao, “Microstructure evaluation on micro and nano slag particles reinforced AA7075 composites” 3rd international conference on Materials science and manufacturing Technology (ICMSMT – 2021), 23-24 April 2021, Coimbatore, Tamil Nadu.
  11. J. Manasi Esther, Y. Ravi Kanth, J. Babu Rao, “Development of High Entropy Nano Slag Particulates Reinforced AA7075 Nano Composites” International conference & 75th Annual Technical Meeting of Indian Institute of Metals (NMD ATM), 13-15 November, 2021, Jamshedpur, pp. 209.
  12. J. Manasi Esther, Y. Ravi Kanth, J. Babu Rao, “Corrosion Behaviour of Al-Si alloy made in Sand and Slag Moulds” International conference & 75th Annual Technical Meeting of Indian Institute of Metals (NMD ATM), 13-15 November, 2021, Jamshedpur, pp. 223.
  13. Lakshmi, B., Y. Ravi Kanth, and J. Babu Rao,“EVALUATION OF CHEMICAL, PHYSICAL AND THERMAL PROPERTIES OF VARIOUS SANDS AND SLAGS” in the 2024 Sixth International Conference on Recent Advances in Materials and Manufacturing (ICRAMM 2024) held at Velalar College of Engineering and Technology, Erode, Tamil Nadu, India during 30 - 31, December 2024.
Memberships

Powder Metallurgy Association of India (PMAI)- Life Member (L01015) -2021 onwards

 

International Association of Engineers (IAENG) - Life Member (342228) -2023 onwards

 

About Lendi

At Lendi, we are recognized as a top institution dedicated to excellence in education.we offer exceptional academic programs that prepare our students for global success. Discover the unique qualities that make our students stand out.

Follow Lendi:

Downloads

Quick Links

Contact Us

Visitors Count!

0 0 6 6 7 1

©Lendi Institute of Engineering and Technology - Established 2008