1. Organized student workshop on “Electric Vehicles and its Recent Technologies” at Dept. of EEE on Lakshya-2024.
2. Acted as technical coordinator for one-week FDP on “NEW TRENDS IN POWER ELECTRONICS FOR MICROGRIDS AND ELECTRIC VEHICLES (NTPEMEV-2024)” organized by Dept. of EEE, LIET.
3. Acted as technical coordinator for one-week FDP on “Recent Advancements in Power Electronics and Drives for Integration of Future Energy Sources” organized by Dept. of EEE, LIET.
1. Participated in One Week Faculty Development Program (FDP) on “Industrial Automation (PLC)” (PLC-2019) held during 1st – 6th July 2019 at Andhra University (AU) ,APSSDC - SIEMENS,Visakhapatnam.
2. Participated in One Week Faculty Development Program (FDP) on “COMPONENTS AND APPLICATIONS OF INTERNET OF THINGS” (CAIoT-2018) held during 24th – 28th Sept 2018 at Indian Institute of Technology PATNA (IIT Patna).
3.Participated in One Week Faculty Development Program (FDP) on “APPLICATION OF EMBEDDED SYSTEMS TO INTERNET OF THINGS” (AESIoT-2018) held during 16th – 21st April 2018 at Lendi Institute of Engineering and Technology (LIET), Jonnada ,Vizianagaram Dist.
4.Participated in One Week Faculty Development Program (FDP) on “ELECTRICAL POWER SYSTEMS WITH EMPHASIS ON MATLAB” (EPSEM-2017) held during 04th – 09th Dec 2017 at Lendi Institute of Engineering and Technology (LIET), Jonnada ,Vizianagaram Dist.
5.Participated in Two Day National Level Faculty Development Program (FDP) on “ELECTRICAL POWER & CONTROL – NEEDS AND RECENT TRENDS” (EPCNRT-2017) held during 13th – 14th Nov 2017 at Nadimpalli Satyanarayana Raju Institute of Technology, Visakhapatnam Dist.
6. Participated in One Week Faculty Development Program (FDP) on “INTERNET OF THINGS (IOT) WITH HANDS ON EXPERIENCE” (2017) held during 10th – 15th Dec 2017 at Lendi Institute of Engineering and Technology (LIET),Jonnada ,Vizianagaram Dist
7. Participated in Two Day Workshop on “AUTOBOTZ-8051” (2011) held during 21st – 22nd Feb 2011 at Coastal Institute OF Technology & Management (CITM),kothavalasa ,Vizianagaram Dist
1.Published a paper on “SMART ELECTRICAL VEHICLE”, in “International Journal of Emerging Technologies and Innovative Research (IJETIR)” Vol 7 Issue-6, June-2020.
2.Published a paper on “HIGHWAY MONITORING SYSTEM AND POWER SAVING”, in “International journal of creative research thoughts (IJCRT)” Vol 8 Issue-4, April-2020.
3.Published a paper on “A Novel Hybrid Fuzzy Logic Controller based RFLC for fault limiting in Transmission Networks and it’s Dynamic Analysis”, in “journal of engineering sciences (JES)” Vol 11 Issue-1, Jan-2020
4.Published a paper on “Solar Powered BLDC Motor with HCC Fed Water Pumping System for Irrigation”, in “International Journal of Research in Applied Science and Engineering Technology (IJRASET)” Vol 7 Issue-III, March 2019 with SJ impact factor 6.887 & UGC approved journal.
5.Published a paper on “Enhancement of Power Quality Using Dynamic Voltage Restorer (DVR) in Low Voltage Distribution”, in “International Journal of Research in Applied Science and Engineering Technology (IJRASET)” Vol 6 Issue-1X, September 2018 with SJ impact factor 6.887 & UGC approved journal.
6. Published a paper on “Minimization of Torque Ripple of Brushless DC Motor Using HCC with DC-DC Converter”, in “International Journal of Research (IJR)” Vol 5 Issue-12, APRIL 2018 with impact factor 5.60 & UGC approved journal.
7. Published a paper on “A Novel Performance Evaluation of Power Quality Features Using Hybrid FACTS Device with Induction Motor”, in “International Journal of Research (IJR)” Vol 4 Issue-17, December 2017 with impact factor 5.60 & UGC approved journal.
8. Published a paper on “Closed-Loop Control of BLDC Motor Driven Solar PV Array Using Zeta Converter Fed Water Pumping System”, in “International Journal of Research (IJR)” Vol 4 Issue-17, December 2017 with impact factor 5.60 & UGC approved journal.
9. Published a paper on “Enhancement of PFC and Torque Ripple Reduction using BL Buck-Boost Converter fed HCC BLDC Drive”, in “International Journal of Research (IJR)” Vol 2 Issue-15, November 2015 with impact factor 3.54.
1.Presented a paper on “Solar PV Array Fed BLDC Motor Drive Using Hysteresis Current Control”, International Conference on “Latest Innovations in Material Engineering & Technology (ICLIET-2018)” held on 15th & 16th June 2018 at Lendi Institute of Engineering & Technology, Jonnada, Vizianagaram.
2.Presented a paper on “A Review on the Micro-Phasor Measurement Unit in Distribution Networks”, International Conference on “2nd Electric Power and Renewable Energy Conference (EPREC-2021)” held on 28th - 30th May 2021 at National Institute of Technology (NIT), Jamshedpur.
3.Presented a paper on “Application of Renewable energy in Charging station for Electric Vehicles: A comprehensive Review”, International Conference on “1st International Conference on Smart Energy and Advancement in Power Technologies (ICSEAPT-2021)” held on 06th - 08th September 2021 at National Institute of Technology (NIT), Jamshedpur.
4. Presented a paper on “Simulation and Optimization of Dynamic Wireless EV Charging Using MATLAB/SIMULINK”, International Conference on “2nd International Conference on Emerging Advances and Applications in Green Energy (ICEAAGE-2025)” held on 25th February 2025 at Prasad V. Potluri Siddhartha Institute of Technology, Kanuru, Vijayawada, Andhra Pradesh, India.
5.Presented a paper on “State-of-Charge-Based Energy Management System for Electric Vehicles Using MATLAB Simulation”, International Conference on “2nd International Conference on Emerging Advances and Applications in Green Energy (ICEAAGE-2025)” held on 25th February 2025 at Prasad V. Potluri Siddhartha Institute of Technology, Kanuru, Vijayawada, Andhra Pradesh, India.
6.Presented a paper on “Design of a Real-Time Solar Power Monitoring System Using Internet of Things”, International Conference on “2nd International Conference on Emerging Advances and Applications in Green Energy (ICEAAGE-2025)” held on 25th February 2025 at Prasad V. Potluri Siddhartha Institute of Technology, Kanuru, Vijayawada, Andhra Pradesh, India.
7.Presented a paper on “Simulation of Bidirectional Electric Vehicle Charger Operation Simulated Using Single-Phase Model”, International Conference on “2nd International Conference on Emerging Advances and Applications in Green Energy (ICEAAGE-2025)” held on 25th February 2025 at Prasad V. Potluri Siddhartha Institute of Technology, Kanuru, Vijayawada, Andhra Pradesh, India.
1.ISTE
2.IAENG
3.IFERP
AWARDS and APPRECIATIONS
List of Projects
1.Home automation using IOT
2.SMART ELECTRIC VEHICLE (E-bicycle)
3.smart traffic system for highways.
4.solar charging station for electric vehicles (EV's)
1) Certified in NPTEL ONLINE COURSE on 'Teaching And Learning in Engineering (TALE)' with Elite + Sliver
2) Certified as a Mentor in NPTEL ONLINE COURSE on 'Desgin of Photo Voltaic SyStems'
3) Certified in NPTEL COURSE on 'Desgin of Photo Voltaic SyStems'
4) Certified in NPTEL COURSE on 'ELECTRICAL MACHINES -I'
5) Certified as a Mentor in NPTEL ONLINE COURSE on 'Introduction to Internet of Things'
6)Certified in SWAYAM COURSE on 'Industrial Automation and Drives'
7)Certified in NPTEL COURSE on 'NATE'
8) SWAYAM online course certification on 'Introduction to Design Thinking'.
At Lendi, we are recognized as a top institution dedicated to excellence in education.we offer exceptional academic programs that prepare our students for global success. Discover the unique qualities that make our students stand out.
©Lendi Institute of Engineering and Technology - Established 2008